Installation details and importance of pipeline compensator

In the process of using the pipeline compensator, its installation method is very important. What are the specific details? Next, Zhenjiang Chunhuan will make the following introduction and explanation on the installation details of the pipeline compensator.

Let's take a look at the importance of the installation details of the pipeline compensator. The pipeline compensator, also known as the corrugated expansion joint, is mainly used in the heating system, fire protection system and smoke and dust system to protect the operation of the pipeline. With the needs of development, there are more and more models of corrugated expansion joints. The installation steps of the pipeline compensator directly affect the service life of the pipeline compensator. Let's learn more about the installation details of the pipeline compensator.

Before installing the pipeline compensator, check its model, specification and pipeline configuration to meet the design requirements. For the expansion joint with inner sleeve, attention should be paid to make the direction of the inner sleeve consistent with the flow direction of the medium, and the hinge rotation plane of the hinge type expansion joint should be consistent with the displacement rotation plane. The compensator that needs to be "cold tight", the auxiliary components used for pre-deformation should be removed after the pipeline is installed. After the installation of the piping system, the yellow auxiliary positioning components and fasteners used for installation and transportation on the corrugated expansion joints should be removed as soon as possible, and the limiting device should be adjusted to the specified position according to the design requirements, so that the piping system has sufficient capacity under environmental conditions. Compensation ability.